GASLAND chef Pro Series Installation Instructions Manual page 15

• Check and confirm each part of the burner. For 15K BTU dual burner part
(from left to right):
burner cap / flame ring / flame ring base / burner base / supporting pipe
• Screw the burner supporting pipe and tighten with the wrench. Making sure
there's no gap between the burner base and supporting pipe. Five full turns
with additional 15 degree will be needed to tighten the supporting pipe
to the burner base.
Warning: Failure to installing the burner pipe correctly will cause gas
leakage during the usage of the product.
Align the pipe with
15K burner base
1 (844) 538-7890
support@gaslandchef.com
Tighten the pipe
with wrench
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
Check the condition
14