Advertisement
Loudspeaker System Specifications
OUTPUT jack (7)
This jack is intended for the use of linking multiple PVX™p 10's in a line or to
provide a feed to a powered subwoofer, or other electronics that needs to receive
a full range version of the input signal. The connector is a male XLR jack.
Bluetooth® LED (8)
Illuminates blue when the Bluetooth® channel has been activated. See the
Bluetooth® section for more information.
Push for DSP (9)
This knob accesses the DSP system user control functions, which include a wide
variety of trims and adjustments to the system, and to individual input channels,
etc. See the DSP Menu section for more details.
LCD Screen for DSP Menu (10)
This screen displays the DSP menu options when the Push for DSP knob (9) is
accessed and operated. See the DSP Menu section for more details.
Not shown in the above rear panel diagram is a front baffle LED which can be
switched to OFF, ON (blue) when power is applied, and LIMIT to indicate when
compression and limiting are occurring by flashing RED. This function is
controlled by accessing the DSP system functions via the Push for DSP Knob
(9).
OPERATING INSTRUCTIONS
Cautions
The unit must be disconnected from the AC power source before any
work is done on it. Refer all servicing to qualified service personnel.
The back plate can become hot to the touch. Do not block or cover the fan or the
exhaust louvers from ventilation. There must be a minimum of 4" of space
behind the fan. Do not allow the airflow to be become blocked by objects such
as curtains or drapes, thermal building insulation, etc. It is recommended that
the rear of the PVX™p 10 Bluetooth® not be placed in a closed space or a space
that has no fresh, cool airflow.
Be sure to keep the microphone away from the front of the speaker after
connecting it to the input, and while setting the microphone level, or very loud
feedback will occur! Damage to the system is likely if this occurs!
7
Advertisement
