Genie DPL Super Series Operator's Manual page 18

Operator's Manual
FUNCTION TESTS
Test Outrigger Interlock
17 Twist to release the red Emergency Stop button
at the platform controls.
Result: The up/down function should operate.
18 Unscrew one leveling jack until the
corresponding interlock display light turns off.
Result: The up/down function should not
operate.
19 Return the leveling jack to the previous setting
and check the bubble level.
20 Repeat the procedure for each outrigger.
Test Auxiliary Platform Lowering
- AC & DC Models
21 Raise the platform slightly.
22 Disconnect the power source from the machine.
23 Turn the key switch to ground control (if
equipped).
24 Push in the auxiliary platform lowering button at
the ground controls.
Result: The platform should lower.
25 Connect the power source to the machine.
26 Turn the key switch to platform control (if
equipped).
27 Raise the platform slightly.
28 Disconnect the power source from the machine.
29 Push in the control activate button and rotate
the up/down switch in the down direction.
Result: The platform should lower.
30 Connect the power source to the machine.
16
Test Manual Lowering
31 Raise the platform slightly.
32 Activate the manual lowering lever.
Result: The platform should lower.
Genie DPL Super Series
First Edition • Fifth Printing
Part No. 38132