Using The Product - Mini Advanced Car Eye 3.0 PRO Instructions For Use Manual

Using the product

microSD™ card
Ensure that the product is turned off before
inserting the memory card.
If the memory card is removed or inserted while
the product is turned on, the stored data may
be lost or the product may get damaged.
Removing the protective
film from the camera lens
Remove the protective film from the front
camera lens before using the front (rear)
camera.
Mounting and removing the
front camera
1
3
The front camera can be mounted or removed
by simultaneously pressing the buttons (1) on
both sides of the camera mount at the same
time.
When connecting the product with the camera
mount, first align the groove (2) at the bottom
of the camera mount with the product, and
then completely assemble the product (3) and
the camera mount.
Removing the front camera also disables the
rear camera.
Be sure to remove the front and rear
camera while the product is turned off.
The stored media may be lost or the
product may get damaged. ◀
1
1
2
2
2
Switching the camera on
and off
■ Automatically:
The camera is switched on automatically
−
by turning on the ignition of the vehicle.
The camera is switched off automatically
−
by turning off the ignition of the vehicle
after a defined time (Exit phase).
■ Manually:
The camera can be switched on
−
manually by pressing the power button.
The camera can be switched off
−
manually by pressing the power button
for three seconds.
■ Press and hold the power button for
3 seconds to turn off the product.
Resetting the product
Press and hold both the power button (
and the record button (
time for several seconds to perform a Reset
ACE (Erase All recordings and Settings).
>
Touch ( )
Settings on the Live View screen to perform a
Reset ACE.
1
Activating ETC product
(only available in China)
Product registration and activation
works only in the ETC app and is only
applicable to users using the product
in China. ◀
1 Download and install the ETC app on your
smartphone.
2 Touch e高速App > ETC网厅 > ETC免费 and
follow the in-app instructions to register
user information.
3 When following the instructions, press and
hold the Bluetooth ( ) and the microphone
button ( ) on the product simultaneously
during the ETC activation step to complete
activation and registration.
) at the same
>
System Settings Reset
)
7