Mini Advanced Car Eye 3.0 PRO Instructions For Use Manual page 13

Recording settings
Driving mode
■ Driving Mode: Select either Continuous or
G-Sensor only to be used in Driving mode.
When changing the Driving mode
recording, the camera will be
formatted automatically. Please back
up all recordings before changing the
channel setting. ◀
■ G-Sensor Sensitivity: Select the desired
sensitivity for driving incidents.
■ Entry Phase: Set the Entry phase time
from one to five minutes.
■ Exit Phase: Set the Exit phase time from
one to five minutes.
Parking mode
Parking Mode: Select a desired Parking
■
mode from Radar + G-Sensor, G-Sensor
only or OFF.
■ G-Sensor Sensitivity: Select the desired
sensitivity for G-Sensor events in Parking
mode.
■ Radar Sensitivity: Select the desired
sensitivity for motion detection in Parking
mode.
Display settings
■ Display Auto-Brightness: Automatically
adjusts the brightness of the display
depending on the ambient brightness.
■ Display Brightness: Select the desired
brightness.
■ Display Auto-Off: Set the time that the
LCD will turn off automatically
■ Display Driving Mode: Set to turn on or off
the LCD automatically in Driving mode.
Volume settings
■ Beepsound: Adjust volume for beep
sounds.
■ Voice guidance: Adjust volume for voice
guidance.
■ Video: Set the video playback volume.
System settings
■ Language: Select the language of the voice
announcements.
■ Country/Region: Select the country/region
where the camera is used.
■ Date and Time: Activate "Set date and
timezone automatically" or set time zone
manually.
■ Daylight Saving: Turn Daylight Saving
(summer time) on or off.
■ Voice gender: Select the desired gender for
the voice announcement.
■ Voice recognition: Turn voice recognition
on or off and select the language.
■ Security LED: Turn the security LED on or
off (may be mandatory in some countries).
■ Overlays: Turn on or off. Date, time, speed
and GPS will be displayed in the recordings.
■ Speed Unit: Select the desired unit for
speed.
■ GPS: Turn GPS on or off.
The GPS feature is not approved in
some countries for legal reasons,
so the feature may be restricted or
unavailable in certain countries. ◀
■ Reset ACE:
Reset
−
Erase All Recordings
−
Erase All Recordings and settings
−
Wi-Fi frequency
• The Advanced Car Eye 3.0 PRO
device uses a 5 GHz band to connect
to the smartphone. It provides
transmission rates faster than 2.4
GHz bands.
• If the used smartphone does not
support 5 GHz, the Wi-Fi frequency
will change to 2.4 GHz. ◀
About
■ Functions: Check the main features of the
product.
■ Device Info: You can check the model
name, firmware version, Micom version,
memory card capacity, and reset system
settings.
■ GPS Info: You can check GPS information.
13