Do you have a question about the Advanced Car Eye 3.0 PRO and is the answer not in the manual?
Questions and answers
Leona Pahalek
February 25, 2025
How do I change the camera to continuous recording while driving and not 1 minute segments?
1 comments:
Mr. Anderson
May 14, 2025
To set the Mini Advanced Car Eye 3.0 PRO to continuous recording while driving, choose the continuous recording mode in the camera settings. In this mode, videos are recorded in 1-minute segments and stored in the "DRIVING" folder. You can view them on the LCD touchscreen by selecting Recordings > Driving.
This answer is automatically generated
Leona Pahalek
February 25, 2025
Why does the app on my phone (Mini Ace 3.0 Pro) only stay connected while I **** in/near the car? As soon as I go inside, the app disconnects from the camera in the car.
1 comments:
Mr. Anderson
February 25, 2025
The Mini Advanced Car Eye 3.0 PRO app disconnects from the camera when you leave the car because the camera automatically switches to Parking mode after the Exit phase time has elapsed. This mode is designed to monitor the vehicle when it is parked, and the app may not maintain an active connection during this state.
Need help?
Do you have a question about the Advanced Car Eye 3.0 PRO and is the answer not in the manual?
Questions and answers
How do I change the camera to continuous recording while driving and not 1 minute segments?
To set the Mini Advanced Car Eye 3.0 PRO to continuous recording while driving, choose the continuous recording mode in the camera settings. In this mode, videos are recorded in 1-minute segments and stored in the "DRIVING" folder. You can view them on the LCD touchscreen by selecting Recordings > Driving.
This answer is automatically generated
Why does the app on my phone (Mini Ace 3.0 Pro) only stay connected while I **** in/near the car? As soon as I go inside, the app disconnects from the camera in the car.
The Mini Advanced Car Eye 3.0 PRO app disconnects from the camera when you leave the car because the camera automatically switches to Parking mode after the Exit phase time has elapsed. This mode is designed to monitor the vehicle when it is parked, and the app may not maintain an active connection during this state.
This answer is automatically generated