Specifications - Mini Advanced Car Eye 3.0 PRO Instructions For Use Manual
Hide thumbs
Also See for Advanced Car Eye 3.0 PRO:
- Instructions for use manual (29 pages) ,
- Instructions for use manual (394 pages)
Table of Contents
Advertisement
Specifications
Items
CPU
Memory
Size
Screen ratio
Panel
Operating range
Resolution
Backlight
LCD
Surface
Brightness (cd/m2)
Contrast ratio
Type
Input
Touch
method
Key
Resolution
G sensor
Memory card
Emergency current
GPS
Interface
Operating voltage
Operating/storage
temperature
Standard
Bluetooth
Frequency range
Number of channels 40
Frequency
Standard
Frequency range
WIFI
Number of channels
Transmit output
Quad-core Cortex-A53, up to 1008 MHz
DDR3 1GByte (32bit) / NAND 512 MB
3.5 inch
16:09
Wide view angle, IPS
75.60(W) x 45.36(H)
800 x 480 (WVGA)
LED
Glar
min 300 / Typ. 350
min 800 / Typ. 1000
Electrostatic touch
Finger
3 touch keys
QHD 2560 x 1440p (30fps)
FHD 1920 x 1080p (30fps)
Japan 27 fps
3-axis acceleration sensor / acceleration range ±4g
UHS-I 32GB / 64GB / 128GB
Super capacitor
3GNSS (GPS,GLONASS), Number of concurrent GNSS: 3
• AV-IN terminal: rear camera
• USB: Mass storage only
12V
-30 - 80°C
Bluetooth V5.0, BLE
2402MHz ~ 2480MHz
2.4GHz RF Specification
IEEE 802.11b/g/n
2.400 GHz - 2.497 GHz
1-11(USA),
1-13(Europe, Korea, China)
• 802.11b /11M: 13 dBm ± 1.5 dB
• 802.11g /54M: 13 dBm ± 1.5 dB
• 802.11n /MCS7: 11 dBm ± 1.5 dB
Description
5GHz RF Specification
IEEE 802.11a/n
5.15 GHz - 5.25 GHz
36-48 Channel
• 802.11a /54M: 13 dBm ± 2 dB
• 802.11n /MCS7: 12 dBm ± 2 dB
15
Advertisement
Table of Contents
Need help?
Do you have a question about the Advanced Car Eye 3.0 PRO and is the answer not in the manual?
Questions and answers
How do I change the camera to continuous recording while driving and not 1 minute segments?
To set the Mini Advanced Car Eye 3.0 PRO to continuous recording while driving, choose the continuous recording mode in the camera settings. In this mode, videos are recorded in 1-minute segments and stored in the "DRIVING" folder. You can view them on the LCD touchscreen by selecting Recordings > Driving.
This answer is automatically generated
Why does the app on my phone (Mini Ace 3.0 Pro) only stay connected while I **** in/near the car? As soon as I go inside, the app disconnects from the camera in the car.
The Mini Advanced Car Eye 3.0 PRO app disconnects from the camera when you leave the car because the camera automatically switches to Parking mode after the Exit phase time has elapsed. This mode is designed to monitor the vehicle when it is parked, and the app may not maintain an active connection during this state.
This answer is automatically generated