Mini Advanced Car Eye 3.0 PRO Instructions For Use Manual page 5
Hide thumbs
Also See for Advanced Car Eye 3.0 PRO:
- Instructions for use manual (29 pages) ,
- Instructions for use manual (394 pages)
Table of Contents
Advertisement
Front camera
The product may only be installed by a MINI
workshop.
1
2
3
4
1 Camera mount
2 microSD™ card slot
3 Security LED
Driving recording: white LED on
−
Driving incident/manual recording: white
−
flashing LED
Parking recording: white LED off
−
Parking incident/Motion recording: white
−
LED on
In Japan, the LED turns off while
recording in driving mode and the
white LED flashes in the event of a
parking incident. ◀
4 Front camera lens
5
6
7
8
9
5 Power button (
Press to turn on the product.
−
Press and hold to turn off the product.
−
6 Status LED
Displays the operating status of the product.
Refer to "Checking the status LED"
for more information. ◀
12
11
10
)
7 Microphone button ( )
Press to turn audio recording on or off.
−
Press and hold to turn voice recognition
−
on or off.
8 Bluetooth button ( )
Press to turn on Bluetooth.
−
Press and hold to start initial Bluetooth
−
pairing.
When Bluetooth is on, press it again to
−
turn off Bluetooth.
9 Recording button (
Press to take a picture or start manual
recording.
Change between video or picture:
>
(
)
Settings
>
Rec Button Action on the Live
view. ◀
10 Touch LCD
11 Speaker
12 Microphone
Rear camera
1
2
1 Security LED
2 Rear camera lens
3 Rear camera mount
4
4 Rear camera cable connector
)
>
Camera settings
3
5
Advertisement
Table of Contents
Need help?
Do you have a question about the Advanced Car Eye 3.0 PRO and is the answer not in the manual?
Questions and answers
How do I change the camera to continuous recording while driving and not 1 minute segments?
To set the Mini Advanced Car Eye 3.0 PRO to continuous recording while driving, choose the continuous recording mode in the camera settings. In this mode, videos are recorded in 1-minute segments and stored in the "DRIVING" folder. You can view them on the LCD touchscreen by selecting Recordings > Driving.
This answer is automatically generated
Why does the app on my phone (Mini Ace 3.0 Pro) only stay connected while I **** in/near the car? As soon as I go inside, the app disconnects from the camera in the car.
The Mini Advanced Car Eye 3.0 PRO app disconnects from the camera when you leave the car because the camera automatically switches to Parking mode after the Exit phase time has elapsed. This mode is designed to monitor the vehicle when it is parked, and the app may not maintain an active connection during this state.
This answer is automatically generated