Table of Contents
Advertisement
Follow these steps to cast songs to the WFR-32:
1.
Make sure all steps from the previous section have
been followed, that the radio is still in the UPnP mode
and that both the PC and the radio are still connected to
the same network.
2.
Go to your music library in Windows Media Player and
right click on a song, album, genre, or playlist and then
select Cast to > WFR-32.
3.
The song (s) will now be cast to the radio and
automatically played through the radio's speaker.
Note:
Some Windows security software can prevent correct
operation of the 'Play to' / 'Cast to Device' function.
Such software may have updates or configuration
options which will permit 'Play to' / 'Cast to Device'
to operate correctly - please consult your anti-virus
software supplier.
GB
USING UPNP SERVER ON MAC OR LINUX
Although this manual only describes how to set up a
UPnP server on Windows using Windows Media Player,
there are similar applications available for macOS and
Linux.
A list of UPnP server applications for your platform can be
found at https://en.wikipedia.org/wiki/List_of_UPnP_AV_
media_servers_and_clients.
Please refer to the documentation that is provided with
these applications for more information on how to set up
the server.
SUPPORTED FORMATS
MP3 (bit rate up to 320 Kbits / s, sampling rate up to 48
KHz)
AAC / AAC+ (bit rate up to 320Kbits / s, sampling rate up
to 48 KHz)
WMA (bit rate up to 320 Kbits / s, sampling rate up to 48
KHz)
WAV / FLAC (sampling rate up to 48 KHz)
AUDIO PLAYBACK VIA USB STORAGE
DEVICE
As the option for USB playback is also available from the
main menu, more information about USB playback can be
found in the next chapter.
8. LISTENING TO MUSIC VIA USB
DEVICE
The WFR-32 is equipped with two USB ports, one for
charging USB devices and one for USB playback. If you
want to listen to music using a USB device, make sure
you connect the USB device to the USB playback port (14).
PLAYBACK FROM A USB DEVICE
Follow these steps to playback music from a USB device:
1.
Insert the USB device into the USB playback port.
2.
Turn on the radio using the Power button (1) on the
radio or the Power button (a) on the remote.
15
3.
Select the USB menu from the radio's main menu.
4.
The radio's display will now show all files and folders on
the USB device. Use the radio's controls or the remote
control to select the file or playlist that you want to play
on the radio.
5.
After playback has started, the display will show cover
art (if available), the artist's name, the track name and
the playback progress. repeatedly press the Next button
(6) on the radio or Right button(r) on the remote control
to zoom in on the cover art or view it in full screen.
Note:
The radio only supports the FAT, FAT32, and exFAT
file systems, so make sure your USB device has been
formatted using the file system. Your radio is unable
to play from media formatted using the NTFS file
system.
Important:
Your radio is only designed to work with USB flash
memory devices. It is not intended to be connected to
hard disk drives or any other type of USB device.
The WFR-32 has been tested to support USB memory
devices with a capacity of up to 256GB. However,
there are many different memory devices available
and not all memory devices can be guaranteed to
work with the WFR-32.
Playback does not support files encoded using WMA
lossless, WMA Voice, WMA 10 professional, nor files
of any format which have DRM protection.
Unless you have only a few files on the USB memory
device, do not store all files in the same root folder.
The number of items (files / sub-folders) in any folder
should be less than 1000.
Searching and playback will be more responsive if
the number of files in any one folder is limited (we
suggest no more than 200).
I t i s r e c o m m e n d e d t h a t t h e U S B m e m o r y i s
reformatted in your computer before adding your
music files.
The maximum depth of folder nesting permitted is 8
folder levels (but playback is only from the currently
selected level).
Cautions:
In order to minimize the risk of damage to your radio
and your USB memory device, please place the unit
in such a manner that the device cannot easily be
knocked while it is inserted in the socket.
Remove the USB device before carrying the unit or
if not using the USB feature for a prolonged period.
Press the power button on the radio (1) or press the
power button on the remote (a) to enter Standby mode
when removing your USB memory device.
SUPPORTED FILE FORMATS
MP3 (bit rate up to 320 Kbits / s, sampling rate up to 48
KHz)
AAC / AAC+ (bit rate up to 320Kbits / s, sampling rate up
to 48 KHz)
WMA (bit rate up to 320 Kbits / s, sampling rate up to 48
KHz)
- Quick Links:
- Controls and Connections
Hide quick links:
Advertisement
Table of Contents
