Pairing A Bluetooth Accessory With A Bluetooth Module - Mitel 5330e Quick Start Manual

3.
Note: If the LED on the Cordless accessory does not start to blink after 10
seconds, the accessory requires charging or is still in factory battery saving mode
(handset only). Place the accessory on the charger and charge. The green LED
starts to flash indicating that the accessory is charging. It could take up to 60
minutes for the green LED to start flashing. Allow the accessory to fully charge,
approximately 3 hours.
4. Press Yes to confirm pairing. The Cordless Devices application confirms the pairing
by displaying the paired device name and its battery level indicator.
5. Press Close to exit.

Pairing a Bluetooth Accessory with a Bluetooth Module

Notes:
•
An IP phone can have one Bluetooth Handset and up to five Bluetooth headsets
(or up to six headsets if no handset is pairedIs paired with what?).
•
To pair a new Bluetooth Handset, you must first unpair the existing Bluetooth
Handset.
•
Pairing cannot be performed when a Bluetooth device is already in use.
To pair I find these notes confusing – the use of "paired" and "pairing" with no object is an
unusual construction.a Bluetooth accessory:
1. Ensure that the battery of the Bluetooth device to be paired is at least partially
charged.
2. Press and hold the pairing button on the back of the Bluetooth Module for 5 seconds
to activate phone pairing mode. The LED on the Bluetooth Module blinks. The
Cordless Devices application opens on the phone and prompts you to place the
accessory in pairing mode.
3. For Mitel Bluetooth Handsets: Press and hold the hookswitch on the side of the
Bluetooth Handset (see page ) for 5 seconds to activate accessory pairing mode. The
LED on the handset blinks. The pairing confirmation window on the IP Phone
appears, displaying the product name for the device to be paired.
Note: If the LED on the handset does not start to blink after 10 seconds, the handset
requires charging or is still in factory battery saving mode. Place the handset on the
charger. The green LED starts to flash indicating that the handset is charging. It could
take up to 60 minutes for the green LED to start Do you mean "stop" flashing?flashing.
Allow the handset to fully charge, approximately 3 hours.