Subscribe to Our Youtube Channel
Related Manuals for AERTECNICA TUBO ROBO TR900L
Summary of Contents for AERTECNICA TUBO ROBO TR900L
- Page 1 INSTRUCTION MANUAL LASER ROBÒ - TR900L VACUUM CLEANER AND FLOOR MOP EN - WARNING: READ THE INSTRUCTIONS BEFORE USE Version translated from the original...
-
Page 2: Contents Of The Manual
Routine maintenance schedule Safety and intended use We are delighted that you have chosen the Cleaning the dust container Battery and charging quality of Aertecnica to keep your home or Cleaning/replacing the filters Laser safety workplace clean. to access AERTECNICA DEVICE area... -
Page 3: General Information
Non-expert of TUBÒ ROBÒ. liquids and sticky substances on the ground. e-mail to info@aertecnica.com (for Italy only) or or untrained persons may only use TUBÒ ROBÒ to the authorised foreign retailer. if supervised by a person responsible for their • Do not place the battery near sources of heat. -
Page 4: Warranty
PLEASE NOTE After opening the packaging, check that the following components – all supplied with TUBÒ ROBÒ – are present: AERTECNICA guarantees TUBÒ ROBÒ TR900L for a The original packaging must be kept in case period of 24 months starting from the documented the product must be shipped to the Technical (invoice or tax receipt) date of purchase. -
Page 5: Description Of The Components
DESCRIPTION OF THE COMPONENTS VIEW FROM ABOVE VIEW FROM BELOW Charging dock Push button panel Mapping laser Main brush cover sensor Connector for Main brush with air flow ring connecting the self-cleaning base Suction channel Rear wheel with Front swivelling wheel shock absorber VIEW FROM BELOW Anti-fall sensors... -
Page 6: Installation
To disable this setting, move TUBÒ ROBÒ off the self-cleaning charging base and simultaneously press and hold for 3 seconds the button and the front collision guard, or disable it via the AERTECNICA DEVICE app. TUBÒ ROBÒ TR900L Instruction Manual... - Page 7 • ROBÒ performs its cleaning cycle regularly even if domestic animals are present. Any zones of the home to be FORBIDDEN ZONE ZONE excluded from ROBÒ’s path can be delimited using the FORBIDDEN ZONE function of the app. AERTECNICA DEVICE. TUBÒ ROBÒ TR900L Instruction Manual...
-
Page 8: Cleaning Programmes
FORBIDDEN ZONE TUBÒ ROBÒ will activate to clean only specific areas. With the “Frequency cleaning area” function Via AERTECNICA DEVICE app. is possible to create TUBÒ ROBÒ setting several consecutive passes virtual barriers, one or more forbidden areas in which the robot doesn’t works. -
Page 9: Spot Cleaning
TUBÒ ROBÒ CONTROL MODES SPOT CLEANING TUBÒ ROBÒ TR900L has three control modes: push-button panel - AERTECNICA DEVICE app. - ATR806 Remote control OPERATION WITH THE PUSH-BUTTON PANEL Spot Start cleaning The push-button panel allows for using the following control modes:... -
Page 10: Cleaning Modes
Press the button to exit the cleaning timing mode Select the time of the cleaning cycle pressing up With the AERTECNICA DEVICE app and the remote and down on the buttons control, it is possible to choose the level of water... -
Page 11: Routine Maintenance
CLEANING THE DUST CONTAINER - (SELF-CLEANING FUNCTION) ROUTINE MAINTENANCE WITH AUTOMATIC CHARGING BASE To guarantee optimal performances from TUBÒ ROBÒ TR900L, complete the single routine maintenance The dust container is cleaned automatically when ROBÒ returns to the self-cleaning charging base. operations listed in this chapter. -
Page 12: Cleaning / Replacing The Brushes
CLEANING / REPLACING THE FILTERS CLEANING / REPLACING THE BRUSHES Visit the tutorial area dedicated to TUBÒ ROBÒ on www.aertecnica.com Visit the tutorial area dedicated to TUBÒ ROBÒ on www.aertecnica.com HEPA FILTER AND SPONGE FILTER We recommend using the comb (C) supplied 1 - Remove the dust container and open the flap with TUBÒ... -
Page 13: Cleaning The Sensors
TANK WITH WATER DISPENSER Visit the tutorial area dedicated to TUBÒ ROBÒ Before using the FLOOR WASHING mode, the on www.aertecnica.com tank with the water dispenser must be filled with water and then emptied at the end of the Use a damp cloth to clean all the sensors and washing cycle. -
Page 14: Troubleshooting
TROUBLESHOOTING The following table lists a series of inconveniences that may occur when using TUBÒ ROBÒ. If the user cannot solve problem, contact Aertecnica (in Italy only) or the authorised foreign retailer. PROBLEM CAUSE ACTION PROBLEM CAUSE ACTION Check for any obstructions and clean the main... - Page 15 ROBÒ DISPOSAL WEEE COLLECTION CENTRE The regulations governing the disposal and demolition of ROBÒ, its components and any polluting materials and substances change in relation to the country of final use. We recommend contacting the authorised agencies and bodies and observing the applicable regulations. WEEE COLLECTION CENTRE WEEE COLLECTION CENTRE WEEE COLLECTION CENTRE...
-
Page 16: Ec Declaration Of Conformity
For any technical problem and to request spare parts, contact Aertecnica (for Italy only) or the authorised foreign retailer.
Need help?
Do you have a question about the TUBO ROBO TR900L and is the answer not in the manual?
Questions and answers