Table of Contents
Advertisement
Fig. 7: Dimensions of lifting eye
Model
Load capacity KW
Load capacity eyelet
Width L [mm]
Width E [mm]
Length C [mm]
Strength N [mm]
Diameter B [mm]
Opening width A [mm]
Strength D [mm]
Width F [mm]
Safety factor eyelet
In accordance with DIN 15405 Part 1, the load hook and the
lifting eye must be replaced with a widening of more than
10%.
ATTENTION!
Only use original parts from the manufacturer of the
hoist as a replacement.
KW-Series | Version 1.03
KW 5
KW 10
5 t
10 t
13,5 t
17,5 t
160
175
36
39
127
142
35
37
33,5
34
60,5
61
36,5
39
84,5
92
4:1
4:1
10 Check the crane scale
The use of the crane scales is possible after:
UVV "Winches, Hoists and Pulling Devices" DGUV regu-
lation 54, UVV "Krane" DGUV regulation 52-Testing in
accordance with DGUV regulation 54 (BGV D8 § 23
(VBG 8 § 23)) by an expert before the first commissio-
ning and after significant changes
Examination according to DGUV regulation 52 (BGV D6
§ 25 (VBG 9 § 25) by an authorized expert before the
first commissioning and after significant changes.
Recurring inspections of equipment, cranes and suppor-
ting structures by an expert once a year. In severe condi-
tions, e.g. frequent operation with full load, dusty or ag-
gressive environment, high switching frequency, high
duty cycle, the test intervals must be shortened.
- Expert for the inspection of cranes, apart from the
experts of the TÜV, only the experts authorized by
the professional associations are.
- Experts are customer service technicians of the ma-
nufacturer or specially trained specialist personnel.
The check of the crane scale must be verified by a log
book.
The test is essentially a visual and functional test. It
covers the examination of the condition of the compo-
nents and equipment, the completeness and effective-
ness of the safety equipment and the completeness of
the test book.
Check the crane scale
17
Advertisement
Table of Contents
