Operation; Operators - unicraft KW 50 Operating Instructions Manual

Operation

8 Operation

8.1 Operators

Turning on / off
Step 1: Press 1 Sec. , the balance is now on. The ba-
lance carries out the initialization and the boot-up
test, then the display flashes three times and shows
the max. Capacity, battery operation on after the
weight and auto zero is detected.
Step 2: Press 1 Sec.
off the scale. The balance will indicate the battery
charge level and off message, then the power will
be turned off.
Zeroing
Step 1: Press or
balance into zero position. The symbol
shines.
a)The balance must not be locked, otherwise
the symbol
b) The balance should be stable, otherwise the
symbol
c)The balance must not be tared, otherwise the
symbol
d) The weight should be in the manual zero
range, otherwise the symbol
be displayed.
Tara on / off
Step 1: Press or
is now in tare mode. The symbol
a) The balance must not be locked, otherwise
the symbol
b)The balance should be stable, otherwise the
symbol will be
c) The weight must be greater than 0, other-
wise the symbol
played.
d) The weight must not exceed 100% of the
max. Capacity, otherwise the symbol
will be displayed.
Step 2: Press or
mode is now off. The Symbol
a) The balance must not be locked, otherwise
the symbol will be
12
or , if you want to switch
, if you want to bring the
ZERO
will be displayed.
will be displayed.
will be displayed.
will
in gross mode, the balance
TARE
shines.
will be displayed.
will be displayed.
will be dis-
in net mode -> the tare
TARE
shines.
displayed.
Locking / unlockingif you want to lock the scale. The symbol
Step 1: Press or
HOLD
scale. The Symbol
a) The balance should be stable, otherwise the
symbol will bel
Step 2: Press or
scale. The symbol
Accumulate
Step 1: Press , if you want to accumulate the cur-
rent weight.
Step 2: The Symbol
accumulated. The balance uses the displayed
weight to add the gross or net weight to the same
register.
a) The balance must not be locked, otherwise
the symbol will be
b) The balance should be stable, otherwise the
symbol will be
c) The weight must be greater than 0, other-
wise the symbol be
d) The display should first show zero before a
new weight is accumulated, otherwise the
symbol will be
Display view
Step 1: Press ,if you want to enter View mode.
The accumulated weight then flashes on the dis-
play.
a) The balance must not be locked, otherwise the
symbol will be displayed.
b) If the accumulated weight is "0", the symbol
will be displayed.
Step 2: By pressing the button
of the display of the digital display can be adju-
sted.
Step 3: Press or
view mode.
Delete (last entry)
Step 1: Press , if you want to clear the last accumu-
lated weight.
Step 2: The symbol
mulated weight has been cleared.
ATTENTION!
The delete function can only delete the last weight!
, if you want to lock the
shines.
displayed.
, if you want to unlock the
HOLD
ist out now.
indicates that the weight is
displayed.
displayed.
displayed.
displayed.
or the quality
, if you want to leave the
indicates that the last accu-
KW-Series | Version 1.03