IMER COMBI 250 V Operating, Maintenance, Spare Parts Manual

Hide thumbs Also See for COMBI 250 V:

Table of Contents

Download this manual

OPERATING, MAINTENANCE, SPARE PARTS

South San Francisco, California 94080

IMER WEST

207 Lawrence Avenue

So. San Francisco, CA 94080

Tel 650 - 872 - 2200

Fax 650 - 873 - 6482

SAWING MACHINE

MANUAL

IMER

U.S.A. Inc.

207, Lawrence Avenue

(650) 872-2200

IMER EAST

221 Westhampton Place

Capitol Heights, MD 20743

Tel 301 - 336 - 3700

Fax 301 - 336 - 6681

6/2002-R1

- Cod. 3210213 -

Table of Contents

Need help?

Do you have a question about the COMBI 250 V and is the answer not in the manual?

Ralph E. Lee

July 31, 2025

Does the motor have brushes that can be replaced

Ralph E Lee

July 31, 2025

does the Imer 250 motor have brushes that need to be replaced when worn down?

Page 1 OPERATING, MAINTENANCE, SPARE PARTS MANUAL IMER U.S.A. Inc. 207, Lawrence Avenue 6/2002-R1 South San Francisco, California 94080 IMER WEST (650) 872-2200 IMER EAST - Cod. 3210213 - 207 Lawrence Avenue 221 Westhampton Place So. San Francisco, CA 94080 Capitol Heights, MD 20743...
Page 2 4.1 General description: partial or total failure to observe the instructions contained in this manual. The Combi 250 V is a saw comprising the following main sub- IMER INTERNATIONAL reserves the right to modify features of groups : the saw and contents of this manual, without the obligation to cutting head (ref.
Page 3 Ensure that an efficient earthing system is 8.1 Lifting and handling installed. The Combi 250 V saw weights 39 Kg and can be moved by Work only with all protection devices fitted means of the side handles on the tank (ref.N fig.5).
Page 4 IMER spare parts; modifications to parts are strictly In the event of an emergency, press the red pushbutton to prohibited. The special design of the COMBI 250 V ensures shut down the machine and disconnect the plug from the that no other maintenance other than as specified above is power mains.

058 205 028