Function Displays - Hasco H1250 Series Operating Instructions Manual

6.2 Function displays

Set point value
Temperature display °C
Second set point value temperature reduction
Display for "lowering the set point temperature", factory setting 150°C.
The temperature can be changed with the arrow buttons.
This function is activated via the PRG button.
This requires the control unit to have been deactivated via the I/O button.
Set point value display = OFF
If the control unit is switched off and on again with the main power switch,
Previous set point is reactivated.
Third set point value temperature increase
Display for "raising set point temperature", factory setting 250°C.
This can be changed with the arrow buttons.
This function is activated via the PRG button.
This requires the control unit to have been deactivated via the I/O button.
Set point value display = OFF
If the control unit is switched off and on again with the main power switch,
Previous set point is reactivated.
Heating output
The
display.
button can be used to display the current heating output in % in the set point value
Instruction manual H1250
HASCO hot runner 9