Safety Information - Hasco H1250 Series Operating Instructions Manual

Instruction manual H1250

11. Safety information

Connecting cable H 1225/... and connection housing H 1227/. . . are to be used for the electrical connections (power and
thermocouple connections) between the control unit and the tool.
This guarantees optimum control accuracy.
The control units are coordinated with HASCO's range of standard elements.
No guarantee of trouble-free functioning can be given if components from other companies are used.
Connection, repair and maintenance work may only be carried out by trained electrical technicians.
During work on the control units and on the cables, devices, machines and tools connected to them, all parts must be
disconnected from the mains power.
The system must also be safeguarded against being unintentionally turned on again.
The H 1225/. . . power/signal cables must be regularly inspected for mechanical damage and replaced if necessary.
The units must be positioned so that they are free-standing, to ensure sufficient ventilation and cooling.
The control units must be protected against moisture and wet.
The units are to be used in a technically meaningful way.
Before changing the fuse, the unit must be disconnected from the mains power.
Only experienced users should operate this equipment.
02.21 / JS
© by HASCO Hasenclever GmbH + Co KG, Postfach 1720, D-58467 Lüdenscheid,
T +49 2351 957-0, F +49 2351 957-237, info@hasco.com, www.hasco.com
Subject to technical modifications
Please always check all the data against the product information we publish in the internet
.
HASCO hot runner 13