8. Maintenance
8-1. System Check
STEP 3. Start 'System Check'
A check cartridge test takes about 1 minute.
STEP 4. Confirm the check cartridge test results
The test results are displayed upon completion.
a.
After checking the results, remove the used cartridge from the tray.
b.
Touch the 'DONE' button to move to the home screen.
c.
Pass : A message that the device is working properly and a
screen.
Fail : An error message and an X mark is displayed on the screen. Try out the test again or
contact the administrator.
If the test fails under [QC Test Settings → QC Lock ON], a test cannot be run.
37
✓
mark is displayed on the