5. Running a Test
5-1. How to Perform RUN TEST
STEP 6-1. When a sample of blood is injected ,
a. Injecting the prepared blood sample into the cartridge
b. After injection, click the'OK' button
c. Start inspection
STEP 6-2. When a sample except blood is injected,
Injecting the prepared blood sample into the cartridge
a.
b. After injection, click the'OK' button
c. Start inspection
Before injecting the sample, check injection location of the test sample and
•
whether a sufficient amount of test sample is prepared.
Inject the test sample within 2 minutes after inserting a cartridge.
•
19