Table of Contents
Advertisement
If pressing any of the emergency buttons, the main power switch turns off forcibly. After pressing the
stand-by button on the control section on the front part of the machine, release the emergency stop
button. After releasing the emergency stop button, press the power-on button on the control section
on the front part of the machine and then restart the software. Do not leave the emergency stop
button pressed. Ink leakage may occur.
Proximity Sensor
The sensor stops the machine if it senses someone approaching the carriage's movable range.
There are 3 proximity sensors on each side of the machine.
The sensors cover the following areas.
As seen from the front of the machine
Guide to Names and Functions of Components
M0DTIC0007
M0DTIC0008
19
Advertisement
Table of Contents
