Table of Contents
Advertisement
ASSEMBLING YOUR BABY FOOD MAKER CONT.
TO INSERT THE STEAMING RACK INTO THE STEAMING BASKET
1
2
Ensure that the Steaming
Insert the Steaming Rack
Basket handle is tipped
from behind the handle,
forwards towards the lip.
grip side up, at an angle and
levelling out to sit on the
ridge.
TO FIT THE STEAMING BASKET INTO THE BLENDER JAR
1
2
Line up the Steaming Basket
Lower the Steaming Basket
lip with the Blender Jar lip.
into the Blender Jar. The
tabs on the Steaming Basket
will sit in the grooves.
3
Pressing downwards, twist
the Steaming Rack clockwise
until the Steaming Rack
locks into place with a click.
To remove, reverse these
steps.
1
To remove, use the handle
to lift the Steaming Basket
out of the Blender Jar
Caution: Hot steam
after use, risk of
scalding.
12
ASSEMBLING YOUR BABY FOOD MAKER CONT.
TO FIT THE LID
1
2
Using the Icons at the back
Twist the Lid clockwise until
of Lid, line up the Unlock
you hear a click. The Lock
Icon with the Handle
Icon is lined up with the
Alignment Indicator. Ensure
Handle Alignment Indicator
that the Lid is sat flat on the
and the Lid lip in-line with
Blender Jar; the tabs will sit
the Blender Jar lip.
into the grooves.
To remove, reverse these steps.
Caution: Hot steam after use, risk of burning and scalding.
Allow 2 minutes to cool before removing the Blender Jar from the Base or the
Lid from the Blender Jar.
3
Ensure that the Lid is
fully sealed before use. If
the Lid is incorrectly
locked the Baby Food
Maker may still work,
risking food and hot
steam escaping from
the Blender Jar. Risk of
scalding.
13
Advertisement
Table of Contents
