Dualit BABY 11060 Instruction Manual & Guarantee page 8

ASSEMBLING YOUR BABY FOOD MAKER CONT.
TO REMOVE THE BLADE ASSEMBLY
Be careful when handling the Blade Assembly. Caution: Blades are very sharp. Jar may
be hot, risk of burning. Allow to cool before removing the Blade Assembly.
1 2
Remove the Blender Jar Turn the Blender Jar so it is
from the Base and remove resting on its side with the
the Lid and Steaming Basket blades facing away from you.
from the Blender Jar.
4
Carefully remove the Blade
Seal from the Blade Hub by
pulling it out and down.
Caution: The blades are
very sharp.
3
Turn the Blade Hub clockwise
and gently push the Blade
Assembly through into the
Blender Jar. Always hold the
Blade Hub, not the blades.
Note: You may wish to use a
tea towel to lift out the blade
and protect your fingers.
14
ASSEMBLING YOUR BABY FOOD MAKER CONT.
TO INSERT THE BLADE ASSEMBLY
Be careful when handling the Blade Assembly. Caution: Blades are very sharp.
1 2
Carefully push the Blade Holding the Blade Hub from
Seal onto the Blade Hub, the top, carefully insert the
ensuring it sits properly Blade Assembly down into
into the recess at the top. the Blender Jar. Note: you
Caution: The blades are may wish to use a tea towel
very sharp. to insert the blade and
protect your fingers.
4
Turn the Blade Hub
anti-clockwise until the Blade
Assembly cannot be turned
further.
3
Turn the Blender Jar so it is
resting on its side.
15