Table of Contents
Advertisement
SETTING UP CONT.
Before first use or after a long period of no use, wash the parts with warm, soapy water and
rinse thoroughly.
4
5
Fill the Blender Jar with
Turn the Control Dial to
150ml of water, insert
the Steam Cook Function
the Steaming Basket and
and leave until the Power
Steaming Rack with no food
Indicator Light turns off and
inside and fit the Lid.
the beep sounds. This will
sterilise the components.
Do not submerge the Base, Power Cord or plug as there is a risk of electric
shock and permanent damage to the appliance.
BEEP!
6
Pour away any remaining
water in the Blender Jar.
Failure to do this will cause
excess limescale build up,
which will increase steam
cooking time and cause
damage to your Baby Food
Maker which may not be
immediately apparent.
10
ASSEMBLING YOUR BABY
FOOD MAKER
Always ensure Control Dial is at the 'O' Position and the Baby Food
Maker is unplugged from the mains before assembling and disassembling.
TO ATTACH THE BLENDER JAR
1
2
Line up the Alignment
Twist clockwise so the
Indicator on the Blender Jar
Alignment Indicator is lined
Base with the Unlock Icon
up with the Lock Icon.
on the Base. Ensure the
Blender Jar is sat flat on top
of the Base.
TO ATTACH THE BASKET SEAL
1
2
Stretch the Seal over the
Ensure the Seal sits flat in
bottom of the Steaming
the recess of the Steaming
Basket.
Basket.
3
To remove, reverse these
steps. Caution: Hot Plate
will be hot after use,
allow 5 minutes to cool
before removing.
3
To remove, use the notches
on the bottom of the
Steaming Basket to pull the
Seal out and down.
11
Advertisement
Table of Contents
