Table of Contents
Advertisement
Quick Links
S S T T 4 4 2 2 5 5
FEATURES
1.
Power On Switch
2. Power On Indicator (green)
3. Battery and Surge Protected Outlets
4. Full-Time Surge Protection Outlets
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 | CyberPowerSystems.com
YOUR ULTIMATE ALLY IN POWER
STANDBY UPS SERIES
ST425 / ST625U / ST900U
USER MANUAL
S S T T 6 6 2 2 5 5 U U
5. Circuit Breaker
6. USB Port to PC (except for ST425)
7. USB Charging ports (except for ST425)
8. Widely-Spaced Outlets
Cyber Power Systems (USA), Inc.
S S T T 9 9 0 0 0 0
Advertisement
Table of Contents
Related Manuals for CyberPower ST425
Summary of Contents for CyberPower ST425
- Page 1 FEATURES Power On Switch 5. Circuit Breaker 2. Power On Indicator (green) 6. USB Port to PC (except for ST425) 3. Battery and Surge Protected Outlets 7. USB Charging ports (except for ST425) 4. Full-Time Surge Protection Outlets 8. Widely-Spaced Outlets Cyber Power Systems (USA), Inc.
-
Page 2: Product Registration
PRODUCT REGISTRATION Thank you for purchasing a CyberPower product. This UPS is designed to provide unsurpassed power protection, operation, and performance during the lifetime of the product. Please take a few minutes to register your product at: www.CyberPowerSystems.com/registration. Registration certifies your product’s warranty, confirms your ownership in the event of a product loss or theft, and entitles you to free technical support. -
Page 3: Installing Your Ups System
(a) UPS unit ment with large electrical demands (e.g. (b) User’s manual air conditioner, refrigerator, copier, etc…). (c) USB device cable (except for ST425) The warranty prohibits the use of extension cords, outlet strips, and surge strips. DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT 1. -
Page 4: Basic Operation
OFF or ON by quickly pressing the fault protection. POWER button twice. The default setting 6. USB Port to PC (except for ST425) is for the Alarm On. To turn the Alarm Off, The port allows connection and communi- quickly press the power button twice. -
Page 5: Troubleshooting
UPS on. Recharge the battery by leaving the UPS Battery not fully charged. plugged in. The UPS does not perform Contact CyberPower Systems about expected runtime. Battery is worn out. replacement batteries at: cyberpower- systems.com/support. The on/off switch is designed to prevent Turn the UPS off. -
Page 6: Technical Specifications
TECHNICAL SPECIFICATIONS ST900U Model ST425 ST625U Capacity 425VA / 260W 625VA / 360W 900VA / 500W Nominal Input Voltage 120 Vac Input Frequency 50/60 Hz ± 3 Hz On-Battery Output Voltage 120Vac ± 5% On-Battery Output Frequency 50Hz/60Hz ± 1% (auto-sensing) Max. -
Page 7: Fcc Compliance Statement
State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. © 2021 CyberPower Systems (USA), Inc. PowerPanel® Personal is a trademark of Cyber Power Systems(USA) Inc. All rights reserved. All other trademarks are the property of their respective owners.