Install A Microsd Card And Reinstall Sim Card - Kyocera DuraForce PRO 2 User Manual

Before starting wireless charging, please note the following:
●
If the charging areas are not touching, the charging results will be poor.
●
Make sure there is nothing between your phone and wireless charger.
●
Your phone may become hot while charging the battery.
● If charging doesn't start after positioning your phone correctly, please use the AC
adapter that came with your phone.
For more information on wireless charging, see your wireless charger documentation.

Install a microSD Card and Reinstall SIM Card

Inserting a compatible microSD card into your phone will increase the storage capacity. Your
phone comes with a preinstalled SIM card. If you need to reinstall your SIM card, follow the
instructions below.
NOTE: microSD cards are sold separately.
1. With the phone facing down, open the SIM/microSD card slot cover.
Hook your fingernail on the rib on the tray's top edge and pull it out.
2.
3. Put the tray onto a flat surface and place a microSD card into the tray with the gold
contacts facing down as shown below.
NOTE: Do not touch the gold contacts of the cards.
NOTE: If you need to reinstall your SIM card, remove the original SIM card from the tray
and place your new SIM card into the tray with the gold contacts facing down as
shown.
6 Get Started