Pairing - Kyocera DuraForce PRO 2 User Manual

2. If Bluetooth is not turned on, tap the ON/OFF icon to turn Bluetooth on.
3. Tap Device name.
4. Enter the name for your phone in the dialog box, and then tap RENAME.

Pairing

Pairing with other devices makes your phone ready for connecting to them.
Pair with Other Devices
NOTE: Other devices' Bluetooth must be turned on before pairing.
IMPORTANT: Perform the pairing process at a secure location.
IMPORTANT: It is recommended to use a passcode of at least eight digits for pairing with a
device without a predefined PIN.
1. From the Apps launcher, tap Settings > Connected devices.
2. Tap Pair new device.
▪
Bluetooth turns on and shows you a list of nearby Bluetooth devices.
3. Tap the name you want to connect to in the Available devices list.
▪
Your phone then automatically tries to pair with the device.
4. If necessary, tap PAIR or enter the passcode.
▪
To change the connected device name, tap
and then tap RENAME.
NOTE: The display may vary depending on the connected device.
Disconnect from or Reconnect to Other Devices
Once the pairing is established, you can connect to or disconnect from the paired device easily.
1. From the Apps launcher, tap Settings > Connected devices.
2. Tap next to the paired device name > DISCONNECT or CONNECT.
Unpair from Other Devices
Unpairing from other devices makes your phone forget its pairing connection with them. To
connect to the other devices again, you may need to enter or confirm a passcode.
1. From the Apps launcher, tap Settings > Connected devices.
2. Tap next to the paired device name > FORGET > FORGET DEVICE.
NOTE: The display may vary depending on the connected device.
Connections
to display its name, tap
57
to edit it,