Install A Microsd Card - Kyocera Hydro PLUS User Manual

2. Remove the battery cover following steps 1-2 in
3. Grasp the white pull-tab extending from the battery pack and pull the battery out of
its compartment.
4. Slide the SD card holder in the direction of the arrow to unlock it (
5. Raise the card and the card holder with your fingers (
6. Gently pull out the card from the holder (
7. Replace the card holder and gently press them, and then slide the holder in the
direction of the arrow to lock it (
8. Place the battery back into its compartment and replace the battery cover. See steps
3-5 in Install the
Note: You can easily damage the microSD card by improper operation. Please be careful
when inserting, removing, or handling the microSD card.
Note: Make sure your battery is fully charged before using the microSD card. Your data may
become damaged or unusable if the battery runs out while using the microSD card.

Install a microSD Card

1. Remove the battery cover following steps 1-2 in
2. Slide the SD card holder in the direction of the arrow to unlock it (
to
Battery.
111
Install the Battery.
).
).
).
Install the Battery.
).
).