Dwell Timing; Power Button Ends Call; Auto-Rotate Screen; Touch & Hold Delay - Kyocera DuraForce PRO 2 User Manual

Dwell timing

You can set the cursor to take action automatically when the cursor stops moving for a certain
amount of time if you are using a mouse.
1. From the Apps launcher, tap Settings > Accessibility > Dwell timing.
2. Tap the ON/OFF
3. Tap left or right side of the Delay before click slider to set the delay time slower or
faster.

Power button ends call

Set your phone to end call by pressing the Power key.
NOTE: This function does not work for incoming calls.

Auto-rotate screen

Set whether to rotate the screen automatically or not when you change your phone's orientation.
NOTE: In some cases, the screen may not rotate regardless of this setting.
Touch & hold delay
Set the delay time when the screen recognizes the touch and hold operation.
1. From the Apps launcher, tap Settings > Accessibility > Touch & hold delay.
2. Select Short, Medium, or Long.

Time to take action (Accessibility timeout)

Choose how long to show messages asking you to take action (if available).
Vibration & haptic strength
See Vibration & haptic

Mono audio

Set the audio output to mono when playing sound of audio data.

Audio balance

Adjust the audio balance.
1. From the Apps launcher, tap Settings > Accessibility.
2. Scroll down to find the Audio balance slider.
3. Adjust the balance by using the slider. A sound clip will play when you slide and hold
the slider to set the balance.
Settings
icon to turn on.
strength.
93