Re-enter Password:
4.4.3
SNMP
On this page, include "Snmpd", " Snmpd Read Only Community", " Snmpd Read Write
Community", you can change setting by manual.
Snmpd:
Default value is Enable
Snmpd Read Only Community:
Snmpd Read Write Community:
4.5 System
4.5.1
Password
The default password is admin, you can enter 1~32 characters for 2 times as your new password.
Then you would logout automatically and you should login to the system by the new password.
4.5.2
Config Management
Clicking the "Export" button, the current settings will be saved as a data file to the local PC.
You can restore the device configuration from the files that you saved.
CPE User Manual V0.1
Telrad CPE12350 User Manual
Default value is "cwmp"
Figure 4-4-3-1 SNMP
Default value is "public"
Default value is "public"
Figure 4-5-1-1 Password
13