Attention:
To prevent damaging the door gasket, make sure to have the door all the way
opened when pulling shelves out of the rail compartment.
For easy access to the storage content, you must pull the shelves approximately 1/3
out of the rail compartment, however this unit was designed with a notch on each sides of the
shelf tracks to prevent bottles from falling.
To fit or remove the shelf, tilt the shelf as below diagram and simply pull out or push into the shelf until
it sits on the support brackets securely.
Tilt the shelf to one side(as shown in below diagram) to remove shelf from cabinet.
•
Removing Shelves
24