The appliance delivered to you has the door opening from the left side. Should you desire to
reverse the opening direction, please follow the below instructions.
ARC1401
Fig.A
Fig.C
Fig.E
1. Lower hinge(Right)
2. Screws
3. Door Axis
4. Door
5. Top hinge(Right)
6. Hinge screws
1. Open the door to a 90 degree angle, unscrew the 2 screws ② from lower door axis
③ , remove the door ④, Remove the axis plate ③ from the door. (Fig. A)
2. Unscrew the screw ⑪located underneath the door frame and the Stopping plate⑩. Put them
Re‐install them to the left side for left hinged installation. (Fig. A & B)
3. Unscrew 3 screws ⑥ from the top hinge (right) ⑤. (Fig. C)
4. Remove decorative nail ⑧ from left top of cabinet and install spare top hinge (Left)
⑦ at left top of cabinet with 3 screws. (Fig. D)
5. Repeat the same procedure (1‐3) to re‐install the upper and lower hinge and parts
⑨ . (Fig. E)
6. Install and align the door.
Insert the plastic caps to cover the holes for top right hinge.
Reversing the Door
Fig.B
Fig.D
Fig.E
7. Top hinge(Left)
8. Decorative nail
9. Lower hinge
10. Stopping plate
11. Screw
25