Lightcloud LCCONTROL/MINI Manual page 11

Setup & Installation
5
Confirm Device Connectivity
Confirm Status Indicator is Solid Green (see details below)
Commission your devices
6
Log on to www.lightcloud.com or call 1 (844) LIGHTCLOUD
DEVICE IDENTIFICATION BUTTON
• Illuminated when device is powered
• Press once to highlight this device in the
Lightcloud Application
• Press twice to toggle circuit on and off
• Press twice and hold to set dim level
• Press and hold for 10 seconds to remove
this device from a Lightcloud network
• Blinks when device is indicated from the
Lightcloud Application
STATUS INDICATOR
GREEN
Solid when connected to your
Lightcloud network. Blinking
connected. The device will automatically
continue trying to connect to a network
in Setup Mode.
SIGNAL INDICATOR
Illuminates when the device receives a
message and blinks the signal strength.
3 Blinks - Best signal
2 Blinks - Acceptable signal
1 Blinks - Unacceptable signal
Consult the "Finding a Location" section
for more information
(cont'd)
RED
when not