Table of Contents
Advertisement
Name and
Symbol
Mnemonic
OR LOAD
OR LD
OUTPUT
OUT
OUTPUT NOT
OUT NOT
COUNTER
CNT
CP
R
TIMER
TIM
Special Instructions
Name
Mnemonic
NO OPERATION
NOP(00)
END
END(01)
Logically ORs the resultant execution conditions
of the preceding logic blocks.
Turns ON B for an ON execution condition; turns
OFF B for an OFF execution condition.
B
Turns OFF B for an ON execution condition;
turns ON B for an OFF execution condition.
B
A decrementing counter. SV: 0 to 9999; CP:
count pulse; R: reset input. The TC bit is entered
as a constant.
CNT N
SV
ON-delay (decrementing) timer operation. Set
value: 000.0 to 999.9 s. The same TC bit cannot
be assigned to more than one timer/counter. The
TIM N
TC bit is entered as a constant.
SV
Symbol
Nothing
operation moves to the next instruction.
None
Required at the end of each program.
Instructions located after END(01) will not
END(01)
be executed.
Function
Function
is
executed
and
program
Appendix C
Operand Data Areas
None
B:
IR (except IR 00 and IR 02)
Work bits
TR
B:
IR (except IR 00 and IR 02)
Work bits
N:
SV:
TC
IR
SR
Work bits
#
N:
SV:
TC
IR
SR
Work bits
#
Operand Data Areas
None
None
Advertisement
Table of Contents
