Specification; Installation; Mounting To The Vehicle - OXTS RT-XLAN User Manual

High performance wlan radio unit
Hide thumbs Also See for RT-XLAN:
Table of Contents

Advertisement

Specification

The specifications for the RT-XLAN are shown in Table 3.
Table 3. Specifications
Parameter
Voltage
Power
Power method
Operating temperature
Wireless LAN radio range
Wireless LAN delay
Networking interface
Approvals
RoHS compliance
Operating humidity
Shock and vibration
Dimensions (RT-XLAN unit, antenna and mount)
Dimensions (RT-XLAN unit, including antenna)
Weight (RT-XLAN and antenna)
Weight (total including mount)

Installation

The installation here assumes that the RT and any RT-Range systems have been installed in the
vehicle already according to the instructions in their manual(s). The installation here covers the RT-
XLAN and how to attach it to the vehicle and to the RT3000 v3 or RT-Range S.
For any installation it is essential to have one RT-XLAN base unit. This would normally be in the
hunter vehicle but it can be in any vehicle. One or more RT-XLAN client unit(s) can be installed in
other vehicles; normally these would be installed in the target vehicles.
In environments where more than one RT-Range is being used the RT-XLAN bases will interfere with
each other. It is essential to only have one RT-XLAN base unit at any one location. When more than
one RT-Range system is being used at the same location and two RT-XLAN bases are needed,
contact OxTS support for further help.

Mounting to the vehicle

The base of the RT-XLAN is a pump cup suction mount that can be attached to any flat non-porous
surface such as glass or vehicle bodywork. This surface can either be metallic or non-metallic, making
the mount ideal for a wide variety of vehicle placement options. Please refer to the drawings in Figure
2 which show the mounting and removal process.
Oxford Technical Solutions Ltd
Passive power over Ethernet
o
o
-40
C to +80
C
1 km line-of-sight
1 X 10/100 BASE-TX
FCC Part 15.247, IC RS210
5 to 95 % condensing
ETSI300-019-1.4
52.5 cm x 15 cm Ø
37.2 cm x 3.7 cm Ø
www.oxts.com
Value
Up to 24 V
~7 W
o
o
(suction mount -10
C to +
45 C)
<10 ms RMS
YES
~0.24 kg
~1.08 kg
Page 6 of 18

Advertisement

Table of Contents
loading

Table of Contents