Suzuki SWACE Owner's Manual page 78

Connecting a Miracast
device
®
Miracast is available when the
®
Wi-Fi function is enabled. (P.39)
1
Turn the Miracast
your smartphone on.
2
Select "Miracast™" on the audio
source selection screen.
(P.57)
 The system will automatically
start searching for a Miracast
compatible device.
3
Check that the following screen
is displayed when the device is
found.
 If the device has been connected
to the system before, this screen
may not be displayed and the
®
Miracast
immediately.
4
Select the system name on the
smartphone.
COROLLA_HV(TMUK)_OEM_MM_(EE)
®
®
function of
®
connection may start
3-3. Media operation
5
Select "YES".
6
Check that Miracast
screen is displayed.
 Depending on the device con-
nected, it may take approxi-
mately 5 to 15 seconds before
®
the Miracast operation screen
is displayed.
●
The signal strength/status of the
®
Wi-Fi connection (P2P mode) is dis-
played on the upper right side of the
screen. (P.11)
●
To check the Miracast
®
Wi-Fi setting screen (P.39)
®
●
Miracast will not be available at the
same time using Wi-Fi
(P2P mode).
77
3
®
operation
®
setting on the
®
connection