6-1. Phone operation (Hands-free system for cellular phones)
Checking sent messages
1
Display the message screen.
(P.117)
2
Select the desired outbox from
the list displayed on the left side
of the screen.
3
Select the desired message
from the list.
4
Check that the message is dis-
played.
"Re-send": Select to re-send the mes-
sage. This switch is displayed if send-
ing the text message has failed.
Create a new message
The message type which can be
created is SMS only.
1
Display the phone top screen.
(P.106)
From the contact or favourite
screen
2
Select "Contacts" or "Favourite".
3
Select desired contact.
From the call history screen
2
Select "History".
3
Select a contact not yet regis-
tered in the contact list.
COROLLA_HV(TMUK)_OEM_MM_(EE)
4
Select
corresponding to the
desired number.
5
Select "New".
6
Enter the message and then
select "OK".
7
Select "Send".
"Cancel": Select to cancel sending the
message.
While the message is being sent,
a sending message screen is
displayed.
8
Check that a confirmation
screen is displayed when the
operation is complete.
If an error message is displayed,
follow the guidance on the
screen to try again.
●
The short messages can contain up to
160 characters. The divided text will
be sent when the message body
exceed over 160 characters.
●
Depending on the type of Bluetooth
phone used for receiving messages,
reply function may not be used.
119
6
®