Suzuki SWACE Owner's Manual page 109

108
6-1. Phone operation (Hands-free system for cellular phones)
WARNING
●
Before using Bluetooth
users of any electrical medical
device other than implantable car-
diac pacemakers, cardiac
resynchronization therapy-pace-
makers or implantable cardioverter
defibrillators should consult the
manufacturer of the device for infor-
mation about its operation under
the influence of radio waves. Radio
waves could have unexpected
effects on the operation of such
medical devices.
NOTICE
●
Do not leave your cellular phone in
the vehicle. In particular, high tem-
peratures inside the vehicle may
damage the cellular phone.
Registering/Connecting a
Bluetooth
To use the hands-free system for
cellular phones, it is necessary to
register a cellular phone with the
system. (P.26)
■ Connecting a Bluetooth
device
Registering an additional device

1
Display the phone top screen.
(P.106)
2
Select "Select device".
3
Select "Add device".
 When another Bluetooth
is connected, a confirmation
screen will be displayed. To dis-
connect the Bluetooth
COROLLA_HV(TMUK)_OEM_MM_(EE)
®
devices,
®
phone
®
®
device
®
device,
select "Yes".
®
 Up to 5 Bluetooth
be registered to the system. If
the maximum number of devices
are registered, registration can-
not be performed from the phone
top screen.
4
Follow the steps in "Registering
®
a Bluetooth phone for the first
time" from step 5. (P.26)
Selecting a registered device

1
Display the phone top screen.
(P.106)
2
Select "Select device".
3
Select the desired device to be
connected.
4
Check that a confirmation
screen is displayed when the
connection is complete.
 If an error message is displayed,
follow the guidance on the
screen to try again.
®
■ Bluetooth phone condition
display
The condition of the Bluetooth
phone appears on the upper right
side of the screen. (P.11)
devices can
®