Suzuki SWACE Owner's Manual page 54

Setting the valet mode
The security system can be set to
on by entering a security code
(4-digit number).
When set to on, the system will
become inoperative once the elec-
trical power source is disconnected
until the security code is entered.
Setting the valet mode
1
Display the vehicle settings
screen. (P.52)
2
Select "Valet mode".
3
Enter the 4-digit personal code
and select "OK".
4
Enter the same 4-digit personal
code again and select "OK".
 The system will request that you
input the security code again to
confirm that you remember it cor-
rectly.
 When valet mode activates, the
system stops and a security
code (4-digit number) standby
screen is displayed. (P.53)
●
If the 4-digit personal code is forgot-
ten, please contact a SUZUKI dealer
or a qualified workshop.
COROLLA_HV(TMUK)_OEM_MM_(EE)
2-4. Other settings
If the valet mode has been
activated
1
Enter the 4-digit personal code
and select "OK".
●
If an incorrect security code (4-digit
number) is entered 6 times, the sys-
tem will not accept another security
code (4-digit number) for 10 minutes.
53
2