Suzuki SWACE Owner's Manual page 134

When using the Bluetooth
message function
Messages cannot be viewed.
■ Message transfer is not ena-
bled on the cellular phone.
Enable message transfer on the
cellular phone (approve message
transfer on the phone).
■ Automatic transfer function on
this system is set to off.
Set automatic transfer function on
this system to on. (P.124)
New message notifications are not
displayed.
■ Notification of SMS/MMS/
E-mail reception on this sys-
tem is set to off.
Set notification of SMS/MMS/
E-mail reception on this system to
on. (P.123)
■ Automatic message transfer
function is not enabled on the
cellular phone.
Enable automatic transfer function
on the cellular phone.
COROLLA_HV(TMUK)_OEM_MM_(EE)
6-3. What to do if...
In other situations
®
The Bluetooth
is displayed at the top of the
screen each time the system is
*
activated.
■ Connection confirmation dis-
play on this system is set to
on.
To turn off the display, set connec-
tion confirmation display on this
system to off. (P.37)
*
: The power switch is in ACC or ON.
Even though all conceivable
measures have been taken, the
symptom status does not change.
■ The cellular phone is not close
enough to this system.
Bring the cellular phone closer to
this system.
■ Radio interference has
occurred.
®
Turn off Wi-Fi
devices that may emit radio waves.
133
®
connection status
devices or other
6