32
2-2. Connectivity settings
played in colour.
Selecting a profile icon which is
not currently connected will
switch the connection to the
function.
If the desired Bluetooth
is not on the list, select "Add new
device" to register the device.
(P.33)
4
Select the desired connection.
"Device info": Select to confirm and
change the Bluetooth
mation. (P.34)
When another Bluetooth
is connected
To disconnect the Bluetooth
device, select "Yes".
5
Check that a confirmation
screen is displayed when the
connection is complete.
If an error message is displayed,
follow the guidance on the
screen to try again.
●
It may take time if the device connec-
tion is carried out during Bluetooth
audio playback.
●
Depending on the type of Bluetooth
device being connected, it may be
necessary to perform additional steps
COROLLA_HV(TMUK)_OEM_MM_(EE)
on the device.
●
When disconnecting a Bluetooth
device, it is recommended to discon-
nect using this system.
®
device
P.108
P.122
®
device infor-
P.75
■
Auto connection mode
®
device
To turn auto connection mode on,
set "Bluetooth power" to on.
®
(P.36) Leave the Bluetooth
device in a location where the con-
nection can be established.
When the power switch is turned
to ACC or ON, the system
searches for a nearby registered
device.
The system will connect with the
registered device that was last
connected, if it is nearby. When
®
automatic connection priority is
set to on and there is more than
®
one registered Bluetooth
Connecting a Bluetooth
device in a different way
(from phone top screen)
Connecting a Bluetooth
device in a different way
(from phone setup screen)
Connecting a Bluetooth
device in a different way
®
(from Bluetooth
audio
screen)
®
®
®
®
®
®
phone