MikroTik RB912R-2nD-LTm Quick Manual

7/30/2021
Pages / Quick Guides
Quick Guide G15
Models: RB912R-2nD-LTm (LtAP mini), RB912R-2nD-LTm&R11e-4G (LtAP mini 4G kit), RB912R-
2nD-LTm&R11e-LTE (LtAP mini LTE kit), RB912R-2nD-LTm&R11e-LTE-US (LtAP mini LTE kit-
US), RBwAPR-2nD (wAP R), RBwAPR-2nD&R11e-LTE (wAP LTE kit), RBwAPR-2nD&R11e-LTE-US
(wAP LTE kit US), RBwAPR-2nD&R11e-4G (wAP 4G kit)
EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v6.48 or the latest version to ensure compliance with local authority regulations!

It is the end users responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic
Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed
This is a wireless network device. You can find the product model name on the case label (ID).
Please visit the user manual page on
Technical specifications, brochures, and more info about products at
Configuration manual for software in your language with additional information can be found at
MikroTik devices are for professional use. If you do not have qualifications please seek a consultant
This Device accepts input of a 24V DC power adapter, which is provided in the original packaging of this device.
First steps:
Remove bottom cover;
Insert the SIM card into the slot;
Connect Ethernet cable to the port;
Connect Ethernet cable to the PoE injector;
Connect included power adapter to the PoE;
Connect to the wireless network;
Open the web browser and connect to the device, the IP: 192.168.88.1, user name: admin, no password;
Use the check for updates option and update the device to the latest software version, must have a valid SIM card inserted;
Connect again and in the QuickSet menu set your Country, to apply country regulation settings;
Secure your device and set a strong password;
To manually update the device if no Internet connection is available;
Download the latest RouterOS software from https://mikrotik.com/download;
Choose MIPSBE packages, and save them to your PC;
Connect again and in Files menu upload downloaded packages;
Restart the device;
The wAP R, LtAP mini devices comes without a modem, install it before inserting a SIM card.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The
installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the
equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware
and configuration or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled
environment. This MikroTik device should be installed and operated no closer than 38 centimeters from your body, occupational user, or the general public.
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
BG - Български. Бързо ръководство:
Това устройство трябва да бъде надстроено до RouterOS v6.48 или най-новата версия, за да се гарантира спазването на местните регулаторни

разпоредби.
Крайните потребители са отговорни за спазването на местните разпоредби, включително работата в рамките на законни честотни канали, извеждане на
продукция изисквания за захранване, окабеляване и изисквания за динамичен избор на честота (DFS). Всички радиоустройства на MikroTik трябва да
бъдат професионално инсталиран.
Това е устройство за безжична мрежа. Можете да намерите името на модела на продукта на етикета на регистъра (ID).
Моля, посетете страницата с ръководството за потребителя на
сканирайте QR кода с мобилния си телефон.
Технически спецификации, брошури и повече информация за продуктите на
Ръководство за конфигуриране на софтуер на вашия език с допълнителна информация можете да намерите на
Устройствата MikroTik са за професионална употреба. Ако нямате квалификация, моля, потърсете консултант
Това устройство приема вход на 24V DC адаптер за захранване, който се предлага в оригиналната опаковка на това устройство.
Първи стъпки:
Свалете долния капак;
Поставете SIM картата в слота;
Свържете Ethernet кабел към порта;
Свържете Ethernet кабел към PoE инжектора;
https://help.mikrotik.com/docs/display/QG/Quick+Guide+G15
Quick Guide G15 - Quick Guides - MikroTik Documentation
https://mt.lv/um for the full up to date user manual. Or scan the QR code with your mobile phone.
https://mikrotik.com/products
https://mt.lv/um-bg
https://mt.lv/help
https://mikrotik.com/consultants
за пълното актуализирано ръководство за употреба. Или
https://mikrotik.com/products
https://mt.lv/help-bg
https://mikrotik.com/consultants
1/18