Optical Input - Fluance Ai81 Quick Start Manual

Optical Input

1. Connect the Optical cable to your source
device (TV, Computer, Game Console...).
Ensure protective caps are removed from
the ends of the Optical cable.
3. Press the Control Knob to select the
Optical Input (White LED).
OR
Press the Source button on the remote
control.
Optical Audio Signal Compatibility
+
The Ai81 does not support Dolby Digital Audio or DTS Audio. Locate the audio output settings
on your source device and ensure Dolby Digital is turned off. The correct audio output setting is
TREBLE
commonly referred to as PCM or Stereo.
Some TVs also require that audio output be enabled. This setting may be referred to as External
Speakers. Ensure this is selected as your speaker/audio output.
For instructions on a specific device, please consult the device's user manual.
*Optical cable not included
VOL +
VOL -
+
BASS
Fluance Ai81 Quick Start Guide
2. Connect the other end of the Optical
cable to the back of the Active Speaker.
4. Adjust the volume on Ai81 as well
as source device.
-
+