Fluance Ai60 Quick Start Guide Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 3
Fluance Ai60 Quick Start Guide Précautions De Sécurité Importantes a Lire En Premier Lisez ces instructions. Conservez ces instructions. Tenez compte de tous les avertissements. Suivez toutes les instructions. N’utilisez pas cet appareil près de l’eau. Nettoyer uniquement avec un chiffon sec.
Fluance Ai60 Quick Start Guide Introduction Thank you for your purchase of your Fluance product. We hope you enjoy your experience. If you have any questions please visit us at www.Fluance.com/support. Fluance has successfully revolutionized the home audio industry. Fluance develops a broad line of high-fidelity products based on five key aspects: Sound Quality, Solid Construction, Performance, Style, and Value.
Fluance Ai60 Quick Start Guide Front & Back Panel Layout Active Speaker Passive Speaker 1. Control Knob • Volume • Input Selection • Power ON/OFF 2. Source LED • Blue (Solid) - Bluetooth ® Paired • Blue (Flashing) - Bluetooth ®...
Fluance Ai60 Quick Start Guide Product Setup Position the speakers with the Active Speaker on the right and the Passive Speaker on the left. Passive Speaker Active Speaker NOTE: If placing the speakers in a cabinet or on a shelf, position the front of the speakers as close as possible to the front edge of the shelf for optimum audio performance.
Connect the other end of the RCA source device (Turntable, Smart- cable to back of the Active Speaker. phone, Computer…). *RCA to RCA cable not included Press the Control Knob to select the Adjust volume on Ai60 as well as RCA input (Yellow LED). source device.
Fluance Ai60 Quick Start Guide Bluetooth® Pairing Press the Control Knob to select the Pair to “Fluance Ai60” on your Bluetooth ® input (Blue LED). source device. Settings Bluetooth MY DEVICES Fluance Ai60 Note: Unit will attempt to auto-pair to the last paired device.
Optical Audio Signal Compatibility The Ai60 does not support Dolby Digital Audio or DTS Audio. Locate the audio output settings on your source device and ensure Dolby Digital is turned off. The correct audio output setting is commonly referred to as PCM or Stereo.
Micro USB port on the back of the Active Speaker. *USB cable not included IMPORTANT: The USB input on the Ai60 is for USB audio playback and not for USB charging. Press the Control Knob to select the Adjust the volume on Ai60 as well USB Input (Purple LED).
*Note: The Fluance Ai60 will only auto-pair to the last device that it was connected to. Another device is connected to my Fluance Ai60 and I want to connect my device.
Fluance Ai60 Quick Start Guide Certification Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Should your Fluance product require warranty service, please contact your Fluance Autho- rized Dealer and send your product fully insured and freight prepaid to the nearest Fluance authorized service center. Before sending to Fluance, you will be required to get a Return Authorization Number from your dealer.
Need help?
Do you have a question about the Ai60 and is the answer not in the manual?
Questions and answers