Rca Input - Fluance Ri71 Quick Start Manual

5
EQ Adjustment
Use the Bass/Treble knobs on the back of the Active Speaker to adjust each from -6 to +6.
LED Behavior:
Red (Flash 2x) - Bass/Treble Set to -6 or +6
Source Color (Flash 2x) - Bass/Treble Set to 0
Note: If using a source device, with it's own EQ settings, ensure it is set to flat(0). Some apps also include
an EQ that should also be set to flat.
EQ Reset
To reset the Bass and Treble levels to 0 put the speakers into Standby mode and press and hold the
Bluetooth Reset button until the red LED flashes. This will reset the speaker to default settings but
will not reset Bluetooth settings.

RCA Input

1. Connect the RCA cable to your
source device (Turntable, Smartphone,
Computer...). Note: If using a turntable
an internal or external preamp is
required.
3. Press the Control Knob to select the
RCA input (Green LED).
Press the Source button on the
remote control.
Note: If connecting a turntable it is recommended to connect a ground wire from the turntable to the
Ground Terminal on the back of the Active Speaker.
2. Connect the other end of the RCA
cable to back of the Active Speaker.
Ground Wire (Optional)
*RCA to RCA cable not included
4. Adjust volume on Ri71 as well as
source device.
Fluance Ri71 Quick Start Guide