Page 5
Using screw (C) attach hinge (D) to parts (1,2) with Philips head screwdriver as per diagram.
Page 6
Secure large adjustable floor leveler (E) under table bottom as per diagram.
Page 7
Using screw (C) attach parts (4,5) to part (1) with Philips head screwdriver as per diagram.
Page 8
Using bolt (A) attach part (3) to part (1) with Hex key (G) as per diagram. Note: Do not fully tighten all the bolts.
Page 9
Using bolt (B) attach part (6) to part (3),using bolt (A) secure the other side of part (6) to part (1) with hex key (G) as per diagram . Note : Fully tighten all bolts .
Page 10
Secure small adjustable floor leveler (F) on part (3) as per diagram.
Page 11
When you use the leaf .Lift up the leaf and hold it .Pull out the leaf supports and keep they are on the adjustable floor levelers(E).If necessary adjust the adjustable floor levelers(E) on the leaf to keep the leaf and table top in the same level .Position the unit at the desired location .If necessary adjust the floor leveler at the bottom of the legs to level the unit .