Document Conventions; Handling The Boards - Profichip VPC3+ Manual

1 Introduction
1.2

Document Conventions

In this User Description signal names appear in italic.
Low active signals are denoted by a "#" after the signal name (i.e.: RD#).
A '0' indicates a logic-zero or low-level signal, while a '1' represents a logic-
one or high-level signal.
1.3

Handling the Boards

Handle the VPC3+ evaluation boards with care in respect to ESD require-
ments. Take precautions to use the boards only at an ESD-safe workplace.
2 Revision 2.00 VPC3+ Evaluation Kit
Copyright © profichip GmbH, 2005