How To Use Flip - Profichip VPC3+ Manual

5 ISP (InSystemProgramming)
5.2

How to use FLIP

After the program FLIP is installed ( ..\ATMEL\FLIP\flip_xyz.zip, setup.exe)
the user has to select
Device/Select).
Figure 5-2: Device Selection
Set on Evaluation board switch S2 to ISP and connect USB cable:
ISP
Figure 5-3: Switch S2, ISP
Open USP Port
Figure 5-4: Open USB Port
34
the type of microcontroller (FLIP Menu:
Position Execute
Client Application
ISP Bootloader
Revision 2.00 VPC3+ Evaluation Kit
Copyright © profichip GmbH, 2005