Table of Contents
Advertisement
1.2
Document Conventions
In this User Description signal names appear in italic.
Low active signals are denoted by a "#" after the signal name (i.e.: RD#).
A '0' indicates a logic-zero or low-level signal, while a '1' represents a logic-
one or high-level signal.
Jumpers and connectors are marked with an 'X' followed by a number
which is unique for each board. A certain pin of such an element is denoted
by the number of the element and the pin numer separated by a dot (e.g.
X9.27 means "connector X9, pin 27").
Keys and switches are marked with an 'S' followed by a number which is
unique for each board. A certain pin of such an element is denoted by the
number of the element and the pin numer separated by a dot (e.g. S2.2
means "switch S2, pin 2").
1.3
Handling the Boards
Handle the VPC3+ evaluation boards with care in respect to ESD require-
ments. Take precautions to use the boards only at an ESD-safe work-
place.
VPC3+S Evaluation Kit
Copyright © profichip GmbH 2009
Revision 1.00
1
Introduction
7
Advertisement
Table of Contents
