Select Profibus Interface; Select Opto/Adum Interface - Profichip VPC3+ Manual

3 VPC3+/C Extension Board

3.3.3 Select PROFIBUS interface

Jumper X12 selects the PROFIBUS interface to be used
PCB is
Default (RS485)
Figure 3-4: PROFIBUS interface

3.3.4 Select Opto/ADuM Interface

Jumper X6..X11 selects the Opto/ADuM interface:
Default (RS485)
Figure 3-5: PROFIBUS interface
16
wrong):
Revision 2.00
Interface
Fiber optic interface
RS485 PROFIBUS interface (DEFAULT)
Interface
ADuM interface
OPTO interface (DEFAULT)
VPC3+ Evaluation Kit
Copyright © profichip GmbH, 2005
(the print on the