Table of Contents
Advertisement
1.1
Overview
Profichip's VPC3+ Evaluation Kit contains all the necessary hardware and
software to easily connect to PROFIBUS-DP.
It consists of:
VPC3+ Evaluation Kit
Copyright © profichip GmbH, 2005
Controller board with Atmel 89C5132 microcontroller
8-bit MCU C51 Core-based (FMAX = 20 MHz)
2304 Bytes of Internal RAM
64K Bytes of Code Memory (Flash)
USB Rev 1.1 Device Controller
32kByte external RAM
RS232 interface
LCD-display
Real Time Clock
wide range of power supply (DC 7-24V)
all relevant signals are applied to the plug connectors
DIP-switches and LED's
VPC3+/C extension board
PROFIBUS link via RS485
PROFIBUS link via fiber optic interface
VPC3+ configurations are done with jumpers
all relevant signals are applied to the plug connectors
PROFIBUS software driver
DPV0 software driver
DPV1 software driver
PROFIBUS demo program
DPV1AFFE: demo program for DPV1
DPV0AFFE: demo program for DPV0
Documentation
Revision 2.00
Introduction
1
1
Introduction
1
Advertisement
Table of Contents
