Advertisement
EG8143A5
Quick Start
No.
1
2
3
4
5
6
7
8
9
Issue 02 (2019-09-10)
Item
Description
TEL
Connects to the ports on a telephone or fax machine.
LAN1-LAN4
Connects to PCs or IP set-top boxes (STBs).
Power
Connects to a power adapter.
On/Off
Powers the ONT on or off.
CATV
Connects to a TV.
Reset
Press the button for a short time to reset the device, or press
the button for a long time (longer than 10s) to restore the
device to the default settings and reset the device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to
access the Internet. If an ONT cannot access the Internet after a reset,
contact your Internet service provider.
WPS
When the WLAN is on, press the WPS button (> 3s) and
release the button to start Wi-Fi protected setup (WPS)
negotiation.
WLAN
Used to enable or disable the WLAN function
- When the WLAN is disabled, press the WLAN button (> 3s)
and release the button to enable the WLAN.
- When the WLAN is enabled, press the WLAN button (> 3s)
and release the button to disable the WLAN.
Optical port
The optical port is equipped with a rubber plug and connected
to a fiber for upstream transmission.
The type of the optical connector connected to the optical port
can be SC/APC.
Copyright © Huawei Technologies Co., Ltd.
2 Connecting Cables
4
Hide quick links:
Advertisement
